Menvier Security TS900+ Manuel d'utilisateur télécharger pdf (Page 28)

View Circuits - 1

Each detection circuit may be viewed to ascertain its status. The circuit status conditions are:

Healthy (H)

The normal status of an alarm circuit.

Active (A)

The status of an activated alarm circuit .

Tamper (T)

The status of a tampered circuit (open circuit).

Shorted (S)

status of circuit which is shorted. A shorted status is generated when a

normally open device such as pressure pad or Exit Terminator is

activated.

1. Ensure that “User menu 2" is selected.

Press 1 to select the View Circuits option.

The display will show:

2. Select the circuit by entering its number

or by pressing:

A To move up one circuit

B To move up ten circuits

C To move down one circuit

e.g., to view circuit 10, enter “10", the

top line of the display shows the circuit

text (if programmed) and the bottom

line shows the status of the circuit e.g.:

3. Press ] to leave this option and return to

“User menu 2".

Set Clock - 2

The system clock uses the 24hr format and provides event times for the system log as well as

displaying the current time when the system is set or unset. The clock is set as follows:

1. Ensure that “User menu 2" is selected.

Press 2 to select the Set Clock option. The

display will show:

2. Enter the time using the number keys,

e.g., enter “1700" for 5.00 PM. The display

will show:

3. Press [ to update with new time setting

or press ] abandon this option and return

to “User menu 2".

User Menu 2 TS790+ & TS900+ User Manual

Front Door

CCT 10 Healthy

CCT 10-H

10-H

View Circuits

Enter CCT No.>- -

CCT 01-H

01-H

Set Clock > - - - -

----

Set Clock > 1700

1700

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 56 57

Commentaires sur ces manuels

Pas de commentaire

Menvier Security TS900+ Manuel d'utilisateur Page 28

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Menvier Security TS900+