Menvier Security TS900+ Manuel d'utilisateur télécharger pdf (Page 31)

Setup Users (Cont.)

To setup users proceed as follows:

1. Ensure that “User menu 2" is selected.

Press 4 to select the Setup users option.

The display will show:

2. Enter the user number (02-31) that is

required to be setup, e.g., to setup user 12

enter "12" followed by [. The display will

show the current user type (Note: If the

code is currently unassigned, the display will

show "Not in use":

3. Select a new user type by pressing:

1 for Master 7 for PA Code

2 for Standard 8 for Access

3 for Holiday 9 for Full set group

4 for Set Only A for Code set grp A

5 for Reset Only B for Code set grp B

6 for Duress C for Code set grp C

e.g., to select user type "Standard" press

"2". The display will show:

4. When the display shows the required

user type press [ to accept. The display will

show:

5. Enter a 4 digit passcode for the selected

user, e.g., enter "2580". The display will

show:

6. Press [ to update with new passcode,

a multi-tone will indicate that the passcode

has been accepted and the display will

return to step 1. A low tone indicates that the

passcode is not available. Re-enter, trying a

different 4 digit passcode.

7. Repeat from step 1 for other users or

press ] to return to "User menu 2".

To delete user passcodes 02-31 from the system, select the user number you wish to

delete at step 2, then enter your own passcode at step 5.

TS790+ & TS900+ User Manual User Menu 2

Alter user type

Not in use

NOT USED

NoTU

Setup users

User No. > --

USER --

Ur--

Alter user type

Standard

STANDARD

TYP

Change pass code

New code > - - - -

----

Change pass code

New code > 2580

2580

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 56 57

Commentaires sur ces manuels

Pas de commentaire

Menvier Security TS900+ Manuel d'utilisateur Page 31

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Menvier Security TS900+