Menvier Security TS400 Manuel d'utilisateur télécharger pdf (Page 5)

Bell Test

This function allows user 1 to periodically test the operation of the internal sounders, external

sounders and strobe.

1 Enter the first 3 digits of your passcode then [HOME]

then [1].

2 All indicators will light and the internal sounder will

operate for five seconds.

3 Thentheexternalsounderwilloperateforfiveseconds.

4 Then the external strobe will operate for fifteen

seconds.

5 Whenthetestiscompleted,thesystemwillreturntothe

unset mode.

6 Tostopthetestatanytimeandreturnthesystemtothe

unset mode, press [0].

Walk Test

This option allows user 1 to periodically test the operation of detectors and door contacts.

Operating detectors whilst the system is in the walk test mode will cause the internal sounder to

emit a pulsed tone and the appropriate zone indicator to light.

1 Enter the first 3 digits of your passcode then [HOME]

then [2].

2 Operateeachzoneinturnbyopeningdoorsfittedwith

alarm contacts and walking in front of movement

detectors.

3 When the test is completed press [0]. A high pitch

acceptancetonewillbeheardandthesystemreturns

to the unset mode.

All indicators light and the internal

sounder operates for 5 seconds.

When the test is completted the system

returns to the unset mode.

? ?? 1

The external sounder operates for

5 seconds.

The strobe operates for 15 seconds.c)

Operate each zone in turn

(e.g. zone 1).

The system is now in the unset mode.

? ?? 2

The appropriate indicator will light

and the internal sounder will pulse.

When finished pressc)

1 2 3 4 5 6 7 8

Pas de commentaire

Menvier Security TS400 Manuel d'utilisateur Page 5