Menvier Security TS400 Manuel d'utilisateur télécharger pdf (Page 6)

Changing Passcode 1 (Master)

This option allows user 1tochange their passcode. The default passcode when the panel leaves

the factory is 5 6 7 8.

1 Enter the first 3 digits of your passcode then [HOME]

then [4].

2 Indicators 1 to 4 will light.

3 Enter your new passcode, as you enter each digit the

indicators will go out one by one.

4 On entering all four digits, indicators 1 to 4 will light

again.

5 Re-enter your new passcode again for confirmation,

asyouentereachdigittheindicatorswillgooutoneby

one.

6 Afterenteringyournewpasscodeforthesecondtime

the system will return to the unset mode.

7 A rising tone indicates the new passcode was

accepted, a falling tone indicates an error and the

above procedure must be repeated.

Changing Passcode 2

This option allows user 1 to change user 2 passcode.

1 Enter the first 3 digits of your passcode then [HOME]

then [6].

2 Indicators 1 to 4 will light.

3 Enter the new passcode, as you enter each digit the

indicators will go out one by one.

4 On entering all four digits, indicators 1 to 4 will light

again.

5 Re-enterthenewpasscode again for confirmation,as

you enter each digit the indicators will go out one by

one.

6 After entering the new passcode for the second time

the system will return to the unset mode.

7 A high rising tone indicates the new passcode was

accepted, a falling tone indicates an error and the

above procedure must be repeated.

The second user passcode will be lost if all power to

the control panel fails.

Indicators 1 - 4 light.

Enter new passcode.

A rising tone indicates acceptance.

A falling tone indicates an error.

? ?? 6

Indicators 1 - 4 light again.

Enter new passcode for confirmation.

Indicators 1 - 4 light.

Enter new passcode.

A rising tone indicates acceptance.

A falling tone indicates an error.

? ?? 4

Indicators 1 - 4 light again.

Enter new passcode for confirmation.

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Menvier Security TS400 Manuel d'utilisateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Menvier Security TS400