Menvier Security TS400 Manuel d'instructions télécharger pdf (Page 3)

Regulatory Requirements

General

The TSD402 control panel must be installed by a electrically competent person. Before

attempting to install the unit, the installer must be aware of the following:

Application

The TSD402 is suitable for connection to the following types of telephone networks:

• Direct exchange lines (PSTN) supporting DTMF (Tone dialling) or Loop Disconnect

(Pulse Dialling).

• PABX exchanges (with or without secondary proceed indication).

The TSD402 is not suitable for connection as an extension to a pay phone or

1+1 carrier systems.

Approval

The TSD402 is approved for the following usage:

• Automatic call initialisation

• Operation in absence of proceed indication

• Automatic dialling

• Multiple repeat attempts

Usage other than the approved usage or failure to comply with the installation and

programming instructions may invalidate any approval given to the apparatus.

Note the approval Label on back of the control panel:

MENVIERSECURITY

TSD402

POWER REQUIREMENTS240V AC @ 200mA MAX

REN=0.0

S/1100/3/R/503255

TSD402 Installation Manual Regulatory Requirements

1 2 3 4 5 6 7 8 ... 31 32

Pas de commentaire

Menvier Security TS400 Manuel d'instructions Page 3