Menvier Security TS400 Manuel d'instructions télécharger pdf (Page 7)

repeated with the acknowledgement "bleeps" again. If the call

is not acknowledged at the end of the fifth play of the message

the unit abandons that call and attempts the next telephone

number. This procedure is repeated three times in sequence for

all three telephone numbers. If no acknowledgement has been

received then the speech dialler shuts down.

Acknowledgement

Options

- The TSD402 may be programmed to stop dialling after the first

call has been acknowledged or when two, or three have been

acknowledged. The acknowledgement may also be disabled

altogether, when the speech dialler is used in this mode it dials

the first telephone number and providing the call is answered it

plays the message and shuts down. If the call is not answered it

dials the next telephone number etc.

Aborting a Call - If the system is accidentally triggered the speech dialler is

automatically shut down when a valid user passcode is entered.

Tone Dialling simulators (Tone Pads)

For the acknowledgement procedure to work successfully the TSD402 "looks" for a 1 second

of tone between 600Hz and 1400Hz. This is supplied most reliably by the [8] button used

for MF dialling although other buttons may work if pressed accidentally.

If the recipients telephone cannot produce a suitable tone then a "Tone Dialling Simulator"

(Tone Pad) may be required. These are available from many high street electrical stores

and also from specialist suppliers such as RS Components (stock code 252-841) and

Maplin Electronics (stock code CK25C).

Specifications

Panel Input Voltage: 240V +/- 10% 50Hz

Current Consumption: 80 mA

Auxiliary power: 13.8v @ 300 mA

Remote Keypad: TS400REM (normal 20mA, alarm 32mA)

Trigger inputs (speech dialler): +ve or -ve applied, input voltages 5 - 28V

REN Value: 0

BT Approval number: S/1100/3/R/503255

Control Panel Dimensions: 205 (W) x 205 (H) x 64 (D) mm

Remote Keypad Dimensions: 130 (W) x 130 (H) x 30 (D) mm

Control Panel Weight: 1.4 Kg

Battery Size 2.1Ah

Case Construction: 3mm Polycarbonate

Environment:

0 - 55°C

TSD402 Installation Manual Overview

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Pas de commentaire

Menvier Security TS400 Manuel d'instructions Page 7