Menvier Security TS400 Manuel d'instructions télécharger pdf (Page 24)

Program Zones (Cont.)

1 Ensure that the "ENGR. OPTION -" is displayed. Press

to select Program Zones.

2 Press keys 1 to 6 to toggle between the two options for each zone (as Shown Below).

3 When completed, press

[

to accept, a two tone acceptance tone will be heard.

View Event Log (key

)

The TSD402 will store up to 64 events within the memory log. When this option is selected

the most recent event is displayed first. Pressing the

[

key takes you backwards through

the Log and pressing the

]

key abandons the View Log option. Table 1 shows event log

descriptions.

Display Description

ACOFF

Mains power removed.

ACON

Mains power restored.

AUPL TA

Auxiliary or panel lid tamper alarm.

BATTFLT

Battery fault (battery reversed or below 10.5V).

CCTAL -

Full alarm from zone 1 - 5 (F = Final Exit when part-set).

CODETA

Code Tamper (4 incorrect passcode entries).

ENTRYTO

Entry timed-out (system not unset after activating F/Exit zone).

FIREAL

Fire Alarm activated.

SETA

AWAY Set.

SETFAIL

System failed to set (zone still active at end of exit time).

SETH

HOME Set.

USER-

User 1 or 2 passcode entered (User 3 = keyswitch).

--------

No Event

Table 1 Log Event Codes and Descriptions

E1- N N N N N E

1 2 3 4 5 6

Press

Key To

Toggle

Zone 1 = Night

Zone 2 = Night

Zone 3 = Night Zone 4 = Night

Zone 5 = Night

F/Exit = Exit

E1- A A S F P A

Zone

Programming

Display

Zone 3 = Keyswitch

Zone 2 = Access

Zone 1 = Access

Final Exit = Access

Zone 5 = P A

Zone 4 = Fire

Programming TSD402 Installation Manual

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Commentaires sur ces manuels

Pas de commentaire

Menvier Security TS400 Manuel d'instructions Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Menvier Security TS400